Product

Factory Outlets Laser Cutter Lens Cleaner - Laser Beam Combiner lens Diameter 20mm 25mm for CO2 Laser Engraving Cutting Machine to Adjust Light Path and Make Laser Visible – HAAS


Product Detail

Product Tags

Related Video

Feedback (2)

Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for Mini Laser Marking Machine, Laser Cleaning System, Metal Marking Machine, Honesty is our principle, skilled procedure is our perform, service is our target, and customers' satisfaction is our long term!
Factory Outlets Laser Cutter Lens Cleaner - Laser Beam Combiner lens Diameter 20mm 25mm for CO2 Laser Engraving Cutting Machine to Adjust Light Path and Make Laser Visible – HAAS Detail:

Product Description

Carmanhaas Beam combiners are partial reflectors that combine two or more wavelengths of light:  one in transmission and one in reflection onto a single beam path. Commonly ZnSe beam combiners are optimally coated to transmit infrared Laser and reflect visible laser beam, as in combining infrared CO2 high-power laser beams and visible diode laser alignment beams.

Technical Parameters

Specifications  Standards
 Dimensional Tolerance  +0.000” / -0.005”
 Thickness Tolerance  ±0.010”
 Parallelism : (Plano)  ≤ 1 arc minutes
 Clear Aperture (polished)  90% of diameter
 Surface Figure @ 0.63um Power: 2 fringes, Irregularity: 1 fringe
 Scratch-Dig  20-10

Product Specification

Diameter (mm)

ET (mm)

Transmission @10.6um

Reflectivity

Incidence

Polarization

20

2/3

98%

85%@0.633µm

45º

R-Pol

25

2

98%

85%@0.633µm

45º

R-Pol

38.1

3

98%

85%@0.633µm

45º

R-Pol

Dimension

3
5

Product Cleaning

Due to the problems encountered when cleaning mounted optics, it is recommended that the cleaning procedures described here be performed only on unmounted optics.
Step 1 – Mild Cleaning for Light Contamination (dust, lint particles)
Use an air bulb to blow off any loose contaminants from the optic surface before proceeding to the cleaning steps. If this step does not remove the contamination, continue to Step 2.
Step 2 – Mild Cleaning for Light Contamination (smudges, fingerprints)
Dampen an unused cotton swab or a cotton ball with acetone or isopropyl alcohol. Gently wipe the surface with the damp cotton. Do not rub hard. Drag the cotton across the surface just fast enough so that the liquid evaporates right behind the cotton. This should leave no streaks. If this step does not remove the contamination, continue to Step 3.
Note: Use only paper-bodied 100% cotton swabs and high-quality surgical cotton balls.
Step 3 – Moderate Cleaning for Moderate Contamination (spittle, oils)
Dampen an unused cotton swab or cotton ball with white distilled vinegar. Using light pressure, wipe the optic’s surface with the damp cotton. Wipe excess distilled vinegar with a clean dry cotton swab. Immediately dampen a cotton swab or cotton ball with acetone. Gently wipe the optic’s surface to remove any acetic acid. If this step does not remove the contamination, continue to Step 4.
Note: Use only paper-bodied 100% cotton swabs.
Step 4 – Aggressive Cleaning for Severely Contaminated Optics (splatter)
Caution: Step 4 should NEVER be performed on new or unused laser optics. These steps are to be done only on optics that have become severely contaminated from use and have no acceptable results yielded from Steps 2 or 3 as previously noted.
If the thin-film coating is removed, the optic’s performance will be destroyed. A change in apparent color indicates the removal of the thin-film coating.
For severely contaminated and dirty optics, an optical polishing compound may need to be used to remove the absorbing contamination film from the optic.
Note:Contamination and damage types, such as metal splatter, pits, etc, cannot be removed. If the optic shows the contamination or damage mentioned, it will probably need to be replaced.


Product detail pictures:

Factory Outlets Laser Cutter Lens Cleaner - Laser Beam Combiner lens Diameter 20mm 25mm for CO2 Laser Engraving Cutting Machine to Adjust Light Path and Make Laser Visible – HAAS detail pictures

Factory Outlets Laser Cutter Lens Cleaner - Laser Beam Combiner lens Diameter 20mm 25mm for CO2 Laser Engraving Cutting Machine to Adjust Light Path and Make Laser Visible – HAAS detail pictures

Factory Outlets Laser Cutter Lens Cleaner - Laser Beam Combiner lens Diameter 20mm 25mm for CO2 Laser Engraving Cutting Machine to Adjust Light Path and Make Laser Visible – HAAS detail pictures

Factory Outlets Laser Cutter Lens Cleaner - Laser Beam Combiner lens Diameter 20mm 25mm for CO2 Laser Engraving Cutting Machine to Adjust Light Path and Make Laser Visible – HAAS detail pictures


Related Product Guide:

Our enterprise aims to operating faithfully, serving to all of our prospects , and working in new technology and new machine frequently for Factory Outlets Laser Cutter Lens Cleaner - Laser Beam Combiner lens Diameter 20mm 25mm for CO2 Laser Engraving Cutting Machine to Adjust Light Path and Make Laser Visible – HAAS , The product will supply to all over the world, such as: Spain, Portland, Portugal, Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
  • We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
    5 Stars By Mary from Jersey - 2017.08.21 14:13
    The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
    5 Stars By Laura from Ireland - 2017.04.18 16:45

    related products