Product

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS


Product Detail

Product Tags

Related Video

Feedback (2)

Adhering for the theory of "quality, services, performance and growth", we have received trusts and praises from domestic and worldwide shopper for Cable Marking Machine, Automatic Lens Cutting Machine, Laser Rust Removal Machine, Hope we can create a more glorious future with you through our efforts in the future.
Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS Detail:

Product Description

Carmanhaas Beam combiners are partial reflectors that combine two or more wavelengths of light:  one in transmission and one in reflection onto a single beam path. Commonly ZnSe beam combiners are optimally coated to transmit infrared Laser and reflect visible laser beam, as in combining infrared CO2 high-power laser beams and visible diode laser alignment beams.

Technical Parameters

Specifications  Standards
 Dimensional Tolerance  +0.000” / -0.005”
 Thickness Tolerance  ±0.010”
 Parallelism : (Plano)  ≤ 1 arc minutes
 Clear Aperture (polished)  90% of diameter
 Surface Figure @ 0.63um Power: 2 fringes, Irregularity: 1 fringe
 Scratch-Dig  20-10

Product Specification

Diameter (mm)

ET (mm)

Transmission @10.6um

Reflectivity

Incidence

Polarization

20

2/3

98%

85%@0.633µm

45º

R-Pol

25

2

98%

85%@0.633µm

45º

R-Pol

38.1

3

98%

85%@0.633µm

45º

R-Pol

Product Cleaning

Due to the problems encountered when cleaning mounted optics, it is recommended that the cleaning procedures described here be performed only on unmounted optics.
Step 1 – Mild Cleaning for Light Contamination (dust, lint particles)
Use an air bulb to blow off any loose contaminants from the optic surface before proceeding to the cleaning steps. If this step does not remove the contamination, continue to Step 2.
Step 2 – Mild Cleaning for Light Contamination (smudges, fingerprints)
Dampen an unused cotton swab or a cotton ball with acetone or isopropyl alcohol. Gently wipe the surface with the damp cotton. Do not rub hard. Drag the cotton across the surface just fast enough so that the liquid evaporates right behind the cotton. This should leave no streaks. If this step does not remove the contamination, continue to Step 3.
Note: Use only paper-bodied 100% cotton swabs and high-quality surgical cotton balls.
Step 3 – Moderate Cleaning for Moderate Contamination (spittle, oils)
Dampen an unused cotton swab or cotton ball with white distilled vinegar. Using light pressure, wipe the optic’s surface with the damp cotton. Wipe excess distilled vinegar with a clean dry cotton swab. Immediately dampen a cotton swab or cotton ball with acetone. Gently wipe the optic’s surface to remove any acetic acid. If this step does not remove the contamination, continue to Step 4.
Note: Use only paper-bodied 100% cotton swabs.
Step 4 – Aggressive Cleaning for Severely Contaminated Optics (splatter)
Caution: Step 4 should NEVER be performed on new or unused laser optics. These steps are to be done only on optics that have become severely contaminated from use and have no acceptable results yielded from Steps 2 or 3 as previously noted.
If the thin-film coating is removed, the optic’s performance will be destroyed. A change in apparent color indicates the removal of the thin-film coating.
For severely contaminated and dirty optics, an optical polishing compound may need to be used to remove the absorbing contamination film from the optic.
Note:Contamination and damage types, such as metal splatter, pits, etc, cannot be removed. If the optic shows the contamination or damage mentioned, it will probably need to be replaced.


Product detail pictures:

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures


Related Product Guide:

Our merchandise are broadly identified and trusted by end users and can satisfy continually developing economic and social requires for Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS , The product will supply to all over the world, such as: Swansea, Romania, Belgium, Our items have national accreditation requirements for qualified, high quality goods, affordable value, was welcomed by people today all over the world. Our products will continue to enhance within the order and look forward to cooperation with you, Should really any of these products and solutions be of curiosity to you, be sure to letus know. We are likely to be content to offer you a quotation up on receipt of your detailed needs.
  • As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Michaelia from Frankfurt - 2018.09.23 17:37
    The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
    5 Stars By Olive from Indonesia - 2017.11.20 15:58

    related products