Product

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS


Product Detail

Product Tags

Related Video

Feedback (2)

The organization keeps for the procedure concept "scientific administration, superior quality and effectiveness primacy, shopper supreme for Qbh Optical Module Manufacturer, Affordable Fiber Laser Engraver, Direct Metal Laser Sintering, We always provide best quality products and excellent service for the majority of business users and traders . Warmly welcome to join us, let's innovate together, and fly dreams.
Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS Detail:

Product Description

Carmanhaas Beam combiners are partial reflectors that combine two or more wavelengths of light:  one in transmission and one in reflection onto a single beam path. Commonly ZnSe beam combiners are optimally coated to transmit infrared Laser and reflect visible laser beam, as in combining infrared CO2 high-power laser beams and visible diode laser alignment beams.

Technical Parameters

Specifications  Standards
 Dimensional Tolerance  +0.000” / -0.005”
 Thickness Tolerance  ±0.010”
 Parallelism : (Plano)  ≤ 1 arc minutes
 Clear Aperture (polished)  90% of diameter
 Surface Figure @ 0.63um Power: 2 fringes, Irregularity: 1 fringe
 Scratch-Dig  20-10

Product Specification

Diameter (mm)

ET (mm)

Transmission @10.6um

Reflectivity

Incidence

Polarization

20

2/3

98%

85%@0.633µm

45º

R-Pol

25

2

98%

85%@0.633µm

45º

R-Pol

38.1

3

98%

85%@0.633µm

45º

R-Pol

Product Cleaning

Due to the problems encountered when cleaning mounted optics, it is recommended that the cleaning procedures described here be performed only on unmounted optics.
Step 1 – Mild Cleaning for Light Contamination (dust, lint particles)
Use an air bulb to blow off any loose contaminants from the optic surface before proceeding to the cleaning steps. If this step does not remove the contamination, continue to Step 2.
Step 2 – Mild Cleaning for Light Contamination (smudges, fingerprints)
Dampen an unused cotton swab or a cotton ball with acetone or isopropyl alcohol. Gently wipe the surface with the damp cotton. Do not rub hard. Drag the cotton across the surface just fast enough so that the liquid evaporates right behind the cotton. This should leave no streaks. If this step does not remove the contamination, continue to Step 3.
Note: Use only paper-bodied 100% cotton swabs and high-quality surgical cotton balls.
Step 3 – Moderate Cleaning for Moderate Contamination (spittle, oils)
Dampen an unused cotton swab or cotton ball with white distilled vinegar. Using light pressure, wipe the optic’s surface with the damp cotton. Wipe excess distilled vinegar with a clean dry cotton swab. Immediately dampen a cotton swab or cotton ball with acetone. Gently wipe the optic’s surface to remove any acetic acid. If this step does not remove the contamination, continue to Step 4.
Note: Use only paper-bodied 100% cotton swabs.
Step 4 – Aggressive Cleaning for Severely Contaminated Optics (splatter)
Caution: Step 4 should NEVER be performed on new or unused laser optics. These steps are to be done only on optics that have become severely contaminated from use and have no acceptable results yielded from Steps 2 or 3 as previously noted.
If the thin-film coating is removed, the optic’s performance will be destroyed. A change in apparent color indicates the removal of the thin-film coating.
For severely contaminated and dirty optics, an optical polishing compound may need to be used to remove the absorbing contamination film from the optic.
Note:Contamination and damage types, such as metal splatter, pits, etc, cannot be removed. If the optic shows the contamination or damage mentioned, it will probably need to be replaced.


Product detail pictures:

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures

Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS detail pictures


Related Product Guide:

We are ready to share our knowledge of marketing worldwide and recommend you suitable products at most competitive prices. So Profi Tools offer you best value of money and we are ready to develop together with Free sample for Laser Cutting And Welding - Laser cutting head nozzle supplier in china – HAAS , The product will supply to all over the world, such as: Johannesburg, Tajikistan, Bogota, With a wide range, good quality, reasonable prices and stylish designs, our items are extensively used in this field and other industries. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success! We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
  • The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
    5 Stars By Diego from Hungary - 2017.04.28 15:45
    This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
    5 Stars By Marian from Namibia - 2018.03.03 13:09

    related products