Product

Manufactur standard Laser Cutting Head Protective Lens Window Manufacturer - Laser cutting head nozzle supplier in china – HAAS


Product Detail

Product Tags

Related Video

Feedback (2)

All we do is usually connected with our tenet " Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for Dynamic Focus System Supplier China, Rust Cleaner Laser, Aspheric Fused Silica Focusing Lens Factory, With the development of society and economy, our company will keep a tenet of "Focus on trust, quality the first", moreover, we expect to create a glorious future with every customer.
Manufactur standard Laser Cutting Head Protective Lens Window Manufacturer - Laser cutting head nozzle supplier in china – HAAS Detail:

Product Description

Carmanhaas Beam combiners are partial reflectors that combine two or more wavelengths of light:  one in transmission and one in reflection onto a single beam path. Commonly ZnSe beam combiners are optimally coated to transmit infrared Laser and reflect visible laser beam, as in combining infrared CO2 high-power laser beams and visible diode laser alignment beams.

Technical Parameters

Specifications  Standards
 Dimensional Tolerance  +0.000” / -0.005”
 Thickness Tolerance  ±0.010”
 Parallelism : (Plano)  ≤ 1 arc minutes
 Clear Aperture (polished)  90% of diameter
 Surface Figure @ 0.63um Power: 2 fringes, Irregularity: 1 fringe
 Scratch-Dig  20-10

Product Specification

Diameter (mm)

ET (mm)

Transmission @10.6um

Reflectivity

Incidence

Polarization

20

2/3

98%

85%@0.633µm

45º

R-Pol

25

2

98%

85%@0.633µm

45º

R-Pol

38.1

3

98%

85%@0.633µm

45º

R-Pol

Product Cleaning

Due to the problems encountered when cleaning mounted optics, it is recommended that the cleaning procedures described here be performed only on unmounted optics.
Step 1 – Mild Cleaning for Light Contamination (dust, lint particles)
Use an air bulb to blow off any loose contaminants from the optic surface before proceeding to the cleaning steps. If this step does not remove the contamination, continue to Step 2.
Step 2 – Mild Cleaning for Light Contamination (smudges, fingerprints)
Dampen an unused cotton swab or a cotton ball with acetone or isopropyl alcohol. Gently wipe the surface with the damp cotton. Do not rub hard. Drag the cotton across the surface just fast enough so that the liquid evaporates right behind the cotton. This should leave no streaks. If this step does not remove the contamination, continue to Step 3.
Note: Use only paper-bodied 100% cotton swabs and high-quality surgical cotton balls.
Step 3 – Moderate Cleaning for Moderate Contamination (spittle, oils)
Dampen an unused cotton swab or cotton ball with white distilled vinegar. Using light pressure, wipe the optic’s surface with the damp cotton. Wipe excess distilled vinegar with a clean dry cotton swab. Immediately dampen a cotton swab or cotton ball with acetone. Gently wipe the optic’s surface to remove any acetic acid. If this step does not remove the contamination, continue to Step 4.
Note: Use only paper-bodied 100% cotton swabs.
Step 4 – Aggressive Cleaning for Severely Contaminated Optics (splatter)
Caution: Step 4 should NEVER be performed on new or unused laser optics. These steps are to be done only on optics that have become severely contaminated from use and have no acceptable results yielded from Steps 2 or 3 as previously noted.
If the thin-film coating is removed, the optic’s performance will be destroyed. A change in apparent color indicates the removal of the thin-film coating.
For severely contaminated and dirty optics, an optical polishing compound may need to be used to remove the absorbing contamination film from the optic.
Note:Contamination and damage types, such as metal splatter, pits, etc, cannot be removed. If the optic shows the contamination or damage mentioned, it will probably need to be replaced.


Product detail pictures:

Manufactur standard Laser Cutting Head Protective Lens Window Manufacturer - Laser cutting head nozzle supplier in china – HAAS detail pictures

Manufactur standard Laser Cutting Head Protective Lens Window Manufacturer - Laser cutting head nozzle supplier in china – HAAS detail pictures

Manufactur standard Laser Cutting Head Protective Lens Window Manufacturer - Laser cutting head nozzle supplier in china – HAAS detail pictures

Manufactur standard Laser Cutting Head Protective Lens Window Manufacturer - Laser cutting head nozzle supplier in china – HAAS detail pictures

Manufactur standard Laser Cutting Head Protective Lens Window Manufacturer - Laser cutting head nozzle supplier in china – HAAS detail pictures

Manufactur standard Laser Cutting Head Protective Lens Window Manufacturer - Laser cutting head nozzle supplier in china – HAAS detail pictures


Related Product Guide:

We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for Manufactur standard Laser Cutting Head Protective Lens Window Manufacturer - Laser cutting head nozzle supplier in china – HAAS , The product will supply to all over the world, such as: Greek, Iceland, Slovakia, We have the best products and professional sales and technical team.With the development of our company, we are able to provide customers best products, good technical support, perfect after-sales service.
  • With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By Melissa from Iceland - 2017.08.16 13:39
    The goods are very perfect and the company sales manager is warmful, we will come to this company to purchase next time.
    5 Stars By Prudence from kazakhstan - 2017.11.29 11:09

    related products